Equipment display
Service Hotline
Add in Wechat
*Professional precision design, designated for use by well-known domestic enterprises The entire machine adopts a cam continuous system, which ensures stable and durable operation
* Adhesive tape sealing
* The cardboard box is stored horizontally and can be replenished with empty cardboard boxes at any time
* Equipped with safety door switch protection device
* Automatic warning reminder for no cardboard boxes in the material trough, supplementary cardboard box function, no tape alarm function (when there is not much left, it will alarm and not stop the machine, and when it is used up, it will alarm and stop the machine)
1,Applicable carton specifications L * W * H (mm): 250-520 * 150-360 * 150-350mm; L+W should not exceed 850mm, H+W: 2: (175-520mm) (Square cardboard boxes should be chamfered to ensure flatness, and confirmation should be obtained from the cardboard box.)
2. Opening speed: 20-25 boxes per minute
3. Storage capacity of cardboard boxes: about 50PCS (storage tank height of 700mm, calculated according to the specific thickness of the cardboard box)
4. Gas source used: 6kg/cm3, 450NL/MIN
5. Exit table height: 960-1000mm
6. Use tape: 48mm (with a length of 50mm on both ends)
7. Machine power: 1KW Voltage 380V 3-phase 50HZ)
8. Machine body parts:
8-1. Machine frame flat steel pipe forming, appearance spray coating
8-2、 The contact mechanism with the cardboard box is made of stainless steel
8-3、 The linear part of the mechanism is configured with linear shafts and linear bearings.
9. Electrical part:
9-1. Main motor: Dongyuan (reducer/working machine)
9-2. Cylinder: Taiwan Yadeke
9-3. Low voltage electrical equipment: Schneider |
9-4. PLC: Siemens
9-5. Human machine interface: Kunlun status
9-6. Optical switch: Biduk/Bonner/SICK
9-7. Frequency converter: Huichuan; Suction cup: FESTO; Vacuum generator: FESTO
10、 Opening method: Horizontal molding
12. Workflow: Bottom suction box - Upper suction and pulling molding - Fold front and rear covers, fold upper and lower covers - Transport sealing box
13. Mechanical dimensions: L2268 * W1330 * H1700mm
